Home arrow Wet Rooms arrow Waterproofing Systems arrow Installation Sequence

Waterproofing Wet Rooms -Aquaproof Installation Instructions

Aquaproof Waterproofing System has been developed specifically to tackle the problem of leakages from tiled wet room areas.  The Aquaproof system can be applied to wooden sheeting, plasterboard, MDF, concrete/screed and most commonly used construction boards including Wedi. 

Applying Aquaproof primer

Walls and floor of wet room are primed with Aquaproof primer. 

 Applying Aquaproof Primer

Applying Aquaproof tape

Aquaproof tape is bedded into a freshly applied stripe coat of Aquaproof compound at all corners and joints. 

 Applying Aquaproof tape

Aquaproof pipe sleeve

Pipe sleeves are pushed over pipe entries and bedded into fresh Aquaproof compound. 

 Applying Aquaproof pipe sleeve

Aquaproof shower outlet sleeve

Shower outlet sleeves are bedded into Aquaproof Compound and dressed down in to the shower outlet (between the outlet body and clamping ring).

 Aquaproof shower outlet sleeve

Aquaproof Corners

Pre-formed corners are bedded into fresh Aquaproof compound. 

 Aquaproof Corners

Overpainting

All tapes, corners and sleeves are overpainted with a generous layer of Aquaproof compound. 

 Aquaproof overpainting

Apply Aquaproof compound

Finally 2-3 coats of Aquaproof compound are applied to the entire area to be waterproofed. 

 applying aquaproof compound
For prices and to buy online please click here
Designed by Cawkwell ITS Printable version