Anti-Mould System
Every day five to ten litres of water evaporate in an average flat, through cooking, washing and breathing. Due to this rise in humidity mould grows. Mould spores are known pathogens for a variety of respiratory diseases, including asthma.
 3183_47110i.jpg

KÖSTER Anti-Mould System

This system eliminates mould and provides long term protection against regrowth. It works in a totally natural way without resorting to any biocides or toxins.

Together the three products in this anti-mould system act as a buffer between damp air and the masonry. They can absorb and then release high quantities of water vapour without allowing droplets to form. In this way the KÖSTER Anti-Mould System provides a dry and mould free surface without restrictions on room climate. 

How the KÖSTER Anti-Mould System Works
 remove mould KÖSTER Anti-Mould System works in five steps. Firstly the mould needs to be thoroughly removed using a stiff brush or scrapper.

KÖSTER AMS 1 - Primer

 
 Brush on AMS 1 -Primer KÖSTER Anti-Mould System Primer (AMS 1) is a solvent free damp barrier with excellent adhesion to any mineral surface.
KÖSTER AMS 2 - Liquid Film  
 AMS liquid film KÖSTER Anti-Mould System Liquid Film (AMS 2) is a special air permeable but waterproof film that is applied as a thick paste with a brush.
KÖSTER AMS 3 - Special Plaster  
 AMS 3 special plaster KÖSTER Anti-Mould System Special Plaster (AMS 3) is a plaster that is extremely absorbant of water vapour despite being applied at a thickness of only 2.5mm. This is due to it's special hydrophobic pore structure.

 

For further information, or to order any of these products, please contact us on 0845 226 8283.